Guitar plugin · VST3 & standalone
LOWTONE
Amp Suite
Three tube amps in one plugin: Pyroclast for modern high gain, The Reverent for biting metal and punk and The Monolith for doom and stoner. Plus pedals, a cabinet with two microphones, effects and EQ – all in one interface.

The amps
Three heads, one plugin
Choose the amp at the top left. Pedals, cabinet, effects and presets stay as they are – so you instantly hear the same sound through a different head.

High gain
Pyroclast
The high-gain head with glowing tubes behind a red grille: tight lows, aggressive mids and enough gain for metal, hardcore and everything in between.

TR20 tube head
The Reverent
A black tube head for metal and punk. Gain with pull boost, treble, middle, bass and volume, switchable between 20 W and 4 W, headphone output with pre/post and a built-in virtual cabinet in 4×12, 2×12 or 1×12.

Doom & stoner
The Monolith
Warm, heavy and loud – in the spirit of the big American tube heads of the 70s. Four inputs, volume, treble, bass and presence. For riffs you feel in your gut.
Signal path
Everything in one chain
The bar at the bottom holds the modules in the order the signal passes through them. Each one can be switched on separately.
- Tuner – tune without leaving the plugin
- Pedals – noise gate, compressor and overdrive in front of the amp
- Amp – Pyroclast, The Reverent or The Monolith
- Tone – channel, voicing and power tubes of the selected amp
- Cab – cabinet with two microphones or your own impulse responses
- FX – chorus, delay and reverb after the amp
- EQ – the final polish for the mix
Plus input, gate and output for the whole plugin and an HQ switch for the highest sound quality.


Pedals
Pedals in front of the amp
A noise gate against hum and hiss, a compressor for more sustain and an overdrive with drive, tone and level to push the amp. Each pedal has its own footswitch.
Tone
Fine-tuning for every amp
The tone page sets how the amp works inside: channel (rhythm or lead), voicing, power tubes (EL34 neutral, 6L6 soft and compressed, KT88 hard with lots of bite), detail for clarity and attack and depth for the low-end resonance of the power amp.


Cab
Two microphones, one cabinet
Choose cabinet and speaker character and place two microphones freely: dynamic or condenser, with position, distance and level. Room, low cut, high cut, phase and delay for microphone B shape the sound like in a studio. Load your own impulse responses straight into microphone A or B.
FX
Effects after the amp
Chorus with rate, depth and mix, delay with time, repeats and mix and a reverb with decay, tone and mix – for width, space and solos without another plugin.

Presets for every amp
Presets don’t switch the amp, they apply to the one you have selected. So you can try every sound with every amp – and save your own presets with one click.
Also in Dual Amp Loader
Load the Amp Suite as a VST3 into a slot of Dual Amp Loader, blend it with a second amp or capture your favourite sound as a NAM profile.
Download
Try the LOWTONE Amp Suite
LOWTONE Amp Suite
Version 0.4.2- System
- Windows 10/11 (64-bit)
- Format
- VST3, standalone
- License
- Proprietary license, demo available
Demo: The demo is meant for trying out and may have limitations. Details are in the license.
By downloading you accept the license terms.
How the demo works
The demo is the same plugin as the full version, with all three amps. Its limitations are listed on the download card.
By downloading you accept the license. The demo may be used for evaluation but not passed on.
More products
Also from the workshop
Freeware · StandaloneDual Amp LoaderTwo independent amp paths with NAM profiles, VST3 plugins and dual IRs – plus a Capture Studio for your own NAM models and the Dual Amp Bridge for TONEX.Free download →
Bass amp pluginSilverlineBass amplifier in the style of the British bass heads of the 80s – with deep and bright switches, two inputs and 4×12, 2×12 and 1×12 cabinets.Learn more · demo →